Liquid-controls XL LED Display E1615_E1616_E1617_E1618 Instrukcja Użytkownika Pobierz pdf (Strona 6)

INSTALLATION OVERVIEW & GUIDELINES

The LectroCount XL LED Remote Display and accessories (whether supplied by Liquid Controls or other) must

be installed and operated in accordance with all applicable federal, state, and local construction, electrical,

environmental and safety codes. Failure to do so could result in serious injury or death.

! WARNING

Installation Overview

The LectroCount XL LED Remote Display is shipped with a 30 foot, 4-wire, shielded cable threaded through a cord

grip at the bottom of the display housing and a selection of unit of display labels twist-tied to the display.



1. Check contents of the shipment and ensure that the correct model is included. page 4

2. Determine which accessories and settings are required and incorporate them into installation. pages 13-17

3. Mount the LectroCount XL LED Remote Display. page 7

4. Wire the LectroCount XL LED Remote Display. pages 8-12

Installation Guidelines

 

If you have any questions, consult with your full service distributor or call the Service Department at Liquid Controls.

 

Ensure that the display does not sustain any excessive vibration or shock. The display should always be securely mounted to a platform or

supportive member.

 

The four models of the LectroCount XL LED Remote Display are designed for use with the devices specied No attempt should be made to

connect the display to an input other than the specied device. Model numbers and compatibility are specied on the display’s serial number

tag. page 4 Model Number and Device Compatibility

 

The LectroCount XL LED Remote Display is supplied with a 30 foot 4-wire shielded cable with 22 gauge wire. The shielded cable should be

adequate for most installations. If alternate cabling is required, Liquid Controls recommends a 4-wire shielded cable with 22 gauge wire or larger

and a maximum cable length of 30 feet.

 

LectroCount XL LED Remote Displays are assembled and shipped ready for nal cable termination. If the display’s preinstalled shielded

cable is removed during installation, be sure to secure the cable and tighten the cover screws in the correct torque pattern so the vapor seal is

maintained. page 18 Torque Specications

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Brak uwag

Liquid-controls XL LED Display E1615_E1616_E1617_E1618 Instrukcja Użytkownika Strona 6